Practical Spectrum Analysis

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Spectrum Analysis in Practice

What is Spectrum Analysis
In order to see the signals that are being transmitted over a satellite, or indeed over any radio frequency system, the most effective tool for visualising them is a spectrum analyser.
A spectrum analyser displays a graphical representation of small portion of radio frequency spectrum. In a way this is similar to looking at a map of a country and zooming in to view a town, street and a house within that street.

Center Frequency and Span

The display is made up of a 10 by 10 grid of squares just like an oscilloscope. The central verticle line represents the center frequency and either side is 5 vertical lines of freqency making up a span of frequencies. The horizontal lines represent amplitude in decibels. Each square is given a value by the user such as 5 dB per square or division for amplitude and say 10 MHz per division for frequency.
The user chooses these settings in order to see the signals of interest and then measure them accurately. Other settings include Resolution Bandwidth and Video Bandwidth.

Resolution Bandwidth (RBW) is the width of a filter that is swept across the selected Span of frequencies and this must be set to a value not less than the bandwidth of the signal you wish to view or it will not be fully captured by the filter and this will result in the signal being displayed inaccurately.
Video bandwidth (VBW) is used to reduce the amount of noise displayed so that signals can be more easily seen and measured. A rule of thumb is to set the video bandwidth to a value of 1/10th or 1/100th of the RBW. This makes measurements easier to calculate in your head.

Reference Level 
The display above shows a signal at a center frequency of 6.5 GHz within a span of frequencies covering 20 MHz. The RBW is set to 10 KHz and the VBW is set to 1 KHz. The reference level is set to -40 dBm and this is the level of the base line of the display, the bottom line of the grid. The noise floor is 2 squares up from this and the dB/Div is set to 5 dB per division. Straight away we can see that the noise floor is at -30 dBm since the bottom line is at -40 dBm and the noise is 2 squares higher at 5 dB/Div.

So now you can begin to see how these settings can be set to find and display a signal so that it be measured. In our next Tutorial we will look at how we can measure values for C/No and how that can be in turn used to verify a link budget. 

Click Here for Next Tutorial

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Satcoms UK Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Administration Satcoms UK Joined: 29/March/2001 Location: United Kingdom Status: Offline Points: 598	Post Options Post Reply Quote Satcoms UK Report Post Thanks(0) Quote Reply Topic: Practical Spectrum Analysis Posted: 14/August/2008 at 15:33
	Spectrum Analysis in Practice What is Spectrum Analysis In order to see the signals that are being transmitted over a satellite, or indeed over any radio frequency system, the most effective tool for visualising them is a spectrum analyser. A spectrum analyser displays a graphical representation of small portion of radio frequency spectrum. In a way this is similar to looking at a map of a country and zooming in to view a town, street and a house within that street. Center Frequency and Span The display is made up of a 10 by 10 grid of squares just like an oscilloscope. The central verticle line represents the center frequency and either side is 5 vertical lines of freqency making up a span of frequencies. The horizontal lines represent amplitude in decibels. Each square is given a value by the user such as 5 dB per square or division for amplitude and say 10 MHz per division for frequency. The user chooses these settings in order to see the signals of interest and then measure them accurately. Other settings include Resolution Bandwidth and Video Bandwidth. Resolution Bandwidth (RBW) is the width of a filter that is swept across the selected Span of frequencies and this must be set to a value not less than the bandwidth of the signal you wish to view or it will not be fully captured by the filter and this will result in the signal being displayed inaccurately. Video bandwidth (VBW) is used to reduce the amount of noise displayed so that signals can be more easily seen and measured. A rule of thumb is to set the video bandwidth to a value of 1/10th or 1/100th of the RBW. This makes measurements easier to calculate in your head. Reference Level The display above shows a signal at a center frequency of 6.5 GHz within a span of frequencies covering 20 MHz. The RBW is set to 10 KHz and the VBW is set to 1 KHz. The reference level is set to -40 dBm and this is the level of the base line of the display, the bottom line of the grid. The noise floor is 2 squares up from this and the dB/Div is set to 5 dB per division. Straight away we can see that the noise floor is at -30 dBm since the bottom line is at -40 dBm and the noise is 2 squares higher at 5 dB/Div. So now you can begin to see how these settings can be set to find and display a signal so that it be measured. In our next Tutorial we will look at how we can measure values for C/No and how that can be in turn used to verify a link budget. Click Here for Next Tutorial
	Satcoms UK The Satellite Communications Community and Resources Website.

Sponsored Links